ERAJET FAME
Standards
ASTM D7797, ASTM D1655, IP583, IP585, IP590, IP599
FAME IN JET FUEL TESTING: FAST, PRECISE, PORTABLE
ERAJET FAME is a rugged and truly portable stand-alone NDIR spectrometer for the ultra-fast and easy determination of all types of FAME in jet fuel. The fully automated analyzer easily determines FAME in jet fuel with lab-grade precision in excellent correlation to international IR (ASTM D7797, IP583) as well as GC (IP585, IP590) standards.
Maximum Precision for Lab and Field Use
There is a risk of FAME contamination during jet fuel transportation resulting from poor pipeline cleaning or from a previous fuel transportation process. With a repeatability of only r ≤ 4 mg/kg and a reproducibility of R ≤ 6 mg/kg ERAJET FAME measures with lab-grade precision over a wide measurement range of 10 to 250 mg/kg (ppm) for AVTUR. The ultra-light and rugged metal housing with its small footprint makes ERAJET FAME equally suited for lab applications and field use.
Ultra-Fast and Fully Automated
With an unrivalled measurement time of only 5 min ERAJET FAME is the fastest FAME in jet fuel analyzer on the market. With its easy to use interface and the fully automated measurement including the sample introduction, ERAJET FAME is the perfect solution even for untrained operators. Cleaning and rinsing of the instrument are an easy task as no special solvent is required.
2-in-1: FAME in Jet Fuel and D4052 Density
Eralytics’ innovative temperature-controlled, high-precision density meter module DENS4052 EXT is now optionally available also for the direct connection with ERAJET FAME. With only 1.3 kg of weight, DENS4052 EXT is the lightest and smallest density meter on the market measuring in full compliance with ASTM D4052. Connected to ERAJET FAME it allows the simultaneous high precision measurement of density and FAME content of AVTUR.
Measurement Principle
ERAJET FAME is a portable, stand-alone FAME in jet fuel tester, using the latest fully automated non-dispersive IR transmission technology in combination with two absorption cartridges.
First, the test specimen is passed through a cartridge which allows the introduction of only non-polar components into the analyzer. The second cartridge selectively absorbs the more polar contaminants, such as oxidation products, and FAME or other esters are passed through without retention.
.
FIC – FAME Interference Check TM
The IR absorption is measured with two independent detectors, each featuring individual optical filters for different wavelengths. Both observed wavelength ranges and the corresponding intensities are associated with the measured concentration of FAME in the sample, and the result is reported as “FAME in Jet Fuel”.
ERAJET FAME applies the unique FAME Interference Check (FIC™) by evaluating the intensity ratio of both detectors. For other contaminants, such as plasticizers or other esters, this ratio will be different compared to FAME, and in this case, the result is marked as “Total Esters in Jet Fuel”.
This superior IR measurement technique in combination with two absorption cartridges guarantees the highest accuracy and reliability, making ERAJET FAME the most efficient FAME in Jet Fuel analyzer on the market.
Applications
The ultra-light, portable and rugged metal housing with its small footprint makes ERAJET FAME equally suited for lab applications and field use. The low weight makes it perfect for straightforward on-site use even in remote locations with limited access to technical infrastructure. Each measurement offers lab-grade results at any time. ERAJET FAME is mainly used at airports, terminals, military facilities, and governmental authorities.
Technical Specifications
Available Test Method
Rugged NDIR-Spectrometer – no moving parts
Correlation to
Infrared spectroscopy: ASTM D7797, IP583
Gas chromatography: IP 585, IP590, IP599
FAME Interference Check
FIC FAME Interference Check (patent pending) to exclude false positive FAME results
Cartridge Set
Distinction between FAME and other esters (plasticizers) even at very low concentrations
Sample Volume
35 mL
Measurement Time
5 min
Measurement Range
10 - 250 mg/kg for AVTUR
Method detection limit (MDL)
10 mg/kg
Precision
Repeatability: r ≤ 4 mg/kg – no false positives
Reproducibility: R ≤ 6 mg/kg
Automatic sample introduction
Sampling directly from sample bottle
Interfaces
Built-in PC with Ethernet, front and rear USB and RS232 interfaces; Wifi via USB dongle. Direct LIMS connectivity via LAN, output to printer or PC and export as CSV or PDF. Optional input by keyboard, mouse and barcode reader
Remote Control
Remote service capability via Ethernet interface
PC Software
ERASOFT RCS – remote control Windows® software for multi-instrument remote control, convenient data transfer and result analysis
Result Database
Over 100 000 detailed test reports stored in internal memory
Alarm Tracking
All alarm messages are stored in the database together with the result
Power Requirements
Auto-switching 85 – 264 V AC, 47 – 63 Hz, max. 150 W (multi-voltage power supply). Field application: 12 V DC (vehicle battery) adapter available
Dimensions / Weight
29 x 35 x 34 cm (11.4 x 13.8 x 13.4 in) / 10 kg (22 lb)
ERAJET FAME Operation Video
Watch this video to get an overview on the standard operation of ERAJET FAME: From installation to measurement, and with the extended measuring option, the external density meter module DENS4052 EXT.
SUBMIT
Name:
This field is required.
Email:
This field is required.
Phone:
This field is required.
Industry:
This field is required.
Company Name:
This field is required.
Address:
This field is required.
Post Code:
Country:
This fi.
ERAJET FAME
For more information on this product or to arrange a call from one of the Cea Petrochemical Team, please complete the contact form below.
