Penetration of Bituminous Material​

Penetration of Bituminous Material, Grease, Petrolatum, Waxes, Gel

 

ASTM D5, D217, D937, D1321, D1403, D1831, D2884, DIN 51579, DIN 51580, DIN 51804, DIN 52010, IP 49, IP 50, IP 179, IP 310, IP 376, ISO 2137

 

ASTM D5, IP 49, DIN 52010 - Penetration of bituminous material

For determination of the penetration of semi-solid and solid bituminous materials.

 

ASTM D217, ASTM D1403, IP 50, IP 310, DIN 51804, ISO 2137 - Cone penetration of lubricating grease

Cover four procedures for measuring the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass and finish.

 

ASTM D937, IP 179, DIN 51580, ISO 2137 - Cone penetration of petrolatum

Covers measuring with a penetrometer the penetration of petrolatum as an empirical measure of consistency.

 

ASTM D1321, IP 376, DIN 51579 - Needle penetration of petroleum waxes

Covers the empirical estimation of the consistency of waxes derived from petroleum by measurement of the extent of penetration of a standard needle. This test method is applicable to waxes having a penetration of not greater than 250.

 

ASTM D1831 - Roll stability of lubricating grease

Covers determination of the changes in the consistency, as measurably cone penetration, of lubricating greases when worked in the roll stability test apparatus.

 

ASTM D2884 - Yield stress of heterogeneous propellants by cone penetration method

Covers determination of the yield stress of heterogeneous propellants, both of the gel and emulsion types, containing from 0 to 70% solid additives.

 

Art. LT/P-65000/M

Precision penetrometer - ASTM D5, D217, D937, D1321, D1403, D1831, D2884

 

  • Metallic base with inset spirit level and adjustable feet

  • Stainless steel column supporting a calibrated dial with 360 divisions corresponding to 1/10 of mm and release button with manual halting function

  • Micrometric regulation

  • 47.5 gr plunger in stainless steel

  • Check light

 

Art. LT/P-66000/M

Semiautomatic penetrometer - ASTM D5, D217, D937, D1321, D1403, D1831, D2884

 

  • Metallic base with inset spirit level and adjustable feet

  • Plate painted with epoxy products that works as a control box with precision digital timer

  • Stainless steel column supporting a calibrated dial with 360 divisions corresponding to 1/10 of mm and release button controlled by a low voltage solenoid, controlled on its turn by a timer

  • 47.5 gr plunger in stainless steel

  • Micrometric regulation of movements with a check light

 

Accessories

LAB-100-661/50: plunger weight 50 g

LAB-100-661/100: plunger weight 100 g

 

Spare Parts

LAB-100-661/47: plunger weight 47.5 gr

LAB-150-038: low voltage solenoid

LAB-150-037: push button

LAB-150-080: digital timer

 

Optional Accessories

  • T-AS17C: thermometer ASTM 17C

  • T-AS17C/C: thermometer ASTM 17C with calibration certificate DKD

  • T-AS63C: thermometer ASTM 63C

  • T-AS63C/C: thermometer ASTM 63C with calibration certificate DKD

  • T-AS64C: thermometer ASTM 64C

  • T-AS64C/C: thermometer ASTM 64C with calibration certificate DKD

  • Accessories for ASTM D5 , IP 49, EN 1426

  • LAB-100-662: penetration needle ASTM D5, IP 49, 2.5 g, pack of 5

  • LAB-100-1426/20: reduction ring for reduce sample volume, ∅ ext. 53 mm, ∅ int. 36 mm, 20 mm height, for EN 1426LAB-100-1426/30: reduction ring for reduce sample volume, ∅ ext. 53 mm, ∅ int.36 mm, 30 mm height, for EN 1426LAB-100-666/B: sample container 55 × 35 mm, made in brass, pack of 5 pcs.

  • LAB-100-666/C: sample container 55 × 45 mm, made in brass, pack of 5 pcs.

  • LAB-100-666/E: sample container 70 × 45 mm, for bitumen, penetrations between 200 and 350, made in brass, pack of 5 pcs.

  • LAB-100-666/G: sample container 70 × 60 mm, for bitumen, penetrations between 350 and 500, made in brass, pack of 5 pcs.

 

Accessories ASTM D217

  • LAB-100-664: optional penetration cone ASTM D217, ∅ 65 mm body of brass, stainless steel tip

  • LAB-100-664/SS: optional penetration cone ASTM D217, ∅ 65 mm,body and tip of stainless steel, for European Pharmacopoeia

  • LAB-100-665: optional penetration cone ASTM D217, ∅ 69 mm, body and tip of stainless steel

  • LAB-100-666/I: sample container 76.5 × 63.5 mm, made in brass, pack of 3 pcs.

  • LAB-100-666/I-ring: external ring for grease restraint/recovery, ∅ 203 mm

  • Accessories for ASTM D937

  • LAB-100-664: optional penetration cone ASTM D217, ∅ 65 mm body of brass, stainless steel tip

  • LAB-100-666/H: sample container 100 × 65 mm, made in steel with cover, pack of 3 pcs.

 

Accessories for ASTM D1321

  • LAB-100-663: needle ASTM D1321, 2.5 g, stainless steel

  • LAB-100-666/F: sample container wax test cylinder 25 × 32 mm, pack of 2

  • LAB-100-666/BC: base plate in brass 63.5 × 38 mm, pack of 2

  • Accessories for ASTM D1403 – D1831

  • LAB-100-711: penetration cone ½ ASTM D1403 IP 310 22.5g, body of brass, stainless steel tip

  • LAB-100-712: slider ½ - 15g

  • LAB-100-713: sample container ½ 38 × 32 mm pack of 3

  • LAB-100-715: penetration cone ¼ ASTM D1403, IP 310, 1.20 gr, body Plexiglas®, stainless steel tip

  • LAB-100-716: Plexiglas® slider ¼ 8.18 gr

  • LAB-100-717: sample container ¼ 19 × 11.5 mm pack of 3

 

Accessories for ASTM D2884

  • LAB-100-719: propellant cone 15 gr, ∅ 65 mm, body in magnesium, stainless steel tip

  • LAB-100-661/47: plunger 47.5 gr

  • LAB-100-666/I: sample container 76.5 × 63.5 mm, made in brass, pack of 3 pcs.

 

Optional Accessories

  • LT/CB-40800/M-10: cryostatic bath (8 litres) for temperatures up to -10°C

  • professional cryostatic baths ideal for all thermostatic application

  • outer body in steel coated in epoxy anti-acid paint

  • double wall heat insulation

  • internal chamber in seamless stainless steel with rounded corners for efficient circulation and cleaning

  • digital display P.I.D. thermostat

  • temperature range from -10°C to +99,9°C accuracy to ±0,5°C to +37°C (BC)

  • display precision ±0,1°C

  • exit RS 485

  • safety thermostat

  • circulating pump: 1mt prevalence

  • power supply 230 V - 50 Hz

  • built according to C.E.I. normatives (66-5)

  • 2 class, DIN 12880

  • capacity: 8 litres

  • LAB-100-660/A: transfer dish

  • LAB-100-332: digital stopwatch

 

CE marked

Alternative Products

 

A sentence here about related products with image links below to products you want customer to consider. 

SUBMIT

Name:

This field is required.

Thank You for your enquiry.

Your information has been sent successfully.  One of the Crea Laboratory technologies Team will be in contact with your shortly. 

 

If your enquiry is urgent, please call us on 1300 552 725

Email:

This field is required.

Phone:

This field is required.

Industry:

This field is required.

Company Name:

This field is required.

Address:

This field is required.

Post Code:

​

Country:

This fi.

Penetration of Bituminous Material

For more information on this product or to arrange a call from one of the Cea Petrochemical Team, please complete the contact form below.