OilLab 880 Saybolt Viscometer​
Standards
ASTM D88, ASTM D7496, ASTM E102, IP 55, FTM 791-0304, JIS K 2207
CE Marked
Subject
ASTM D88 Saybolt Viscosity: covers the measurement of viscosities of petroleum products at temperature between 21° and 99°C (70° ÷ 210°F)ASTM D7496: This test method utilizes the Saybolt Furol viscometer to measure the consistency of emulsified asphalt. It is applicable to all the emulsified asphalts specified in Specifications D977 and D2397.ASTM E 102 Saybolt Viscosity: covers the measurement of viscosities of petroleum products at temperature between 121° and 232°C (250° ÷ 450°F)
Principle of detection
The sample is heated and mantained stable at test temperature. Once the analisys start the valve is opened and a real time CCD camera will observe the flow of the sample until reach the level mark and close the valve. The time and relevant viscosity index (SUS and/or SFS) are automatically calculated.
Measuring Temperature Devices
- Bath temperature: PT100 sensor stainless and steel
Detection system
- Integrate CMOS sensor high definition
- Integrate LED backlight
Heater
- Electrical heating
Safety Devices
- Safety thermostat over-temperature cut-out
Software Features
User friendly interface
All analytical parameters recorded
Customizable analysis parameters and methods
Customizable results report
Printable graphs and results
Orifices calibration procedure with reference sample
Centering procedure of the level mark of the receiver flask
Automatic open/close valves
Automatic viscosity calculation
Audible chimie alarm for over-temperature
Selectable temperature displaying: °C / °F
The software includes:
Analysis Menu
Automatic execution of the analysis in accordance to the selected procedure (Standard method as per ASTM / IP / ISO / EN / DIN… norms of reference)
Display in real time of all the analysis parameters and status
Fields for introduction of operator and product name
Audible alarm and displayed messages at the end of the analysis and in case of errors and/or malfunctions
Diagnostic Menu
Direct access to all analog, digital, inputs and outputs
Selectable value displaying: °C / Volt
Calibration Menu
Up to 100 calibration points (standard with 5 and dynamic with up to 100 points)
Last calibration date referred to each single probe displayed and relevant data printable
Display of calibration diagram
Comparative with reference thermometer
Selection calibration due date
Data Utilities
Archive viewer for files recall
All analysis stored in Excel® compatible format
Analysis storage
Storage capacity for more than 65.000 analysis
Export of test results files in the most common formats Excel and PDF
Reading interval of PT100 sample from 0 to 450 °C with resolution 0.1 °C
Integrated Touch Screen Panel PC
TFT/LCD 8.4"
Resolution 1024 × 768, 16.2 M colours
1 × USB ports for connection to an external printer
Electrical Supply
220V ± 15% / 50 to 60 Hz
115V ± 15% / 60 Hz
Ambient Temperature
Max 35 °C
H.R. 80%
Weight
45 kg
Dimensions
width: 43 cm
depth: 38 cm
height: 60 cm
Accessories
LAB-100-161: filter funnel with stainless steel wire mesh
LAB-100-162: Saybolt flask 60 ml
LAB-100-163: thermometer support
LAB-100-164: withdrawal tube
LAB-100-167: movement ring ASTM E 102
LAB-100-168: suction pipette
Spare Parts
LAB-100-161: filter funnel with stainless steel wire mesh
LAB-100-162: Saybolt flask
LAB-100-164: withdrawal tube
LAB-100-165: universal orifice
LAB-100-166: furol orifice
LAB-100-168: suction pipette
LAB-100-371: silicone oil 25 litres
LAB-140-001/A: PT100 probe
LAB-11-0012: heater
Alternative Products
A sentence here about related products with image links below to products you want customer to consider.
