OilLab 510 | Foaming Tester | Crea Petrochemical

Standards

ASTM D892, ASTM D6082, DIN 51566, IP 146

CE marked

Subject

Foaming characteristics of lubricating oils: this test method covers the determination of the foaming characteristics of lubricating oils at 24°C and 93.5°C. Means of empirically rating the foaming tendency and the stability of the foam are described.

Main Features

Four test position heated air bath for measuring the foaming tendencies of lubricating oils in the temperature range of +20 to +150°C.
Compact and robust analyzer painted with epoxy paint.
Automatic analyser as for ASTM D892 and ASTM D6082.
The electronic board grant the digital display of the signals with a resolution of 0.01 and a bath temperature stability of +/- 0.5°C.
Long temperature probe is positioned for digital control and test sample temperature and precise temperature control during the foaming process.
4 independent micro pump and 4 independent digital airflow meter indicating mass air flow with automatic flow controllers are used for precisely measuring and controlling the amount of air delivered to the air diffuser.
The airflow is controlled at either a rate of 94 or 200 ±5 mL/min, depending if testing by ASTM D892 or D6082, respectively.
The parameters are displayed during the test on the touch screen allows the operator selection and full adjustment of all test parameters.
The labLink software include operator name , filename, 4 independent analysis, diagnostic and calibration menu.
A multi-pane insulated window allows full view of the test cylinder for observation of the foam.
The unit is supplied with the built in cooling system made by integrated Peltier modules (LAB-510-18-01) able to maintain the chamber temperature below +24°C.
Internal rack able to accommodate 4 test cylinder with warm light.
The 7” PC with resolution of 480 x 800, 1 × usb port, equipped with the Lablink software with both ASTM D892 and D6092 test methods, for automatic start /stop soak time, audible alarm after completing soak time

Integrated Touch Screen Panel PC

TFT/LCD 7”
Resolution 480 × 800
1 USB port

Software

Real time display of all the analytical parameters
Automatic calibration of each temperature probe by means of the calibration decade box
Storage of the data referred to the calibration
Last calibration date referred to each single probe displayed
Access to all analogue and digital signals (inlet and outlet) in order to verify their functioning.

Accessories